Follow these procedures to enable MEET MANAGER to broadcast wireless data for use by Wi-Fi enabled Palm OS's and Wi-Fi enabled Pocket PC's loaded with HY-TEK's HY-WIRE software.
| · | Check the Activate the HY-WIRE System check box.
|
| · | Change the Data Location to C:\Hy-Wire if it is not already set to that.
|
| · | Start NetExchange and minimize it after confirming that the Event Files and Results Files folders are set to C:\Hy-Wire.
|
| · | If you are starting a new meet, click Purge Files to clear out all previous HY-WIRE data.
|
| · | Select one or more sessions from the Session List and click Create Startup Files. Do not select All Sessions unless it is a small meet. The size of the Start List file cannot be greater than 64K. If it is, MM will not create the Start List and will provide a message to use one session only. Whether the start lists are created or not, you will have the option to create result files for any heats that may have been completed. Please note that events that have alpha-numeric event numbering, such as 14A, will not be sent to HY-WIRE.
|
| · | Provide the Local Computer's IP Address to all HY-WIRE users. In the example below, the IP address is 192.168.0.101. Each HY-WIRE user must select Preferences / Comm in their HY-WIRE software and enter this IP address. Each HY-WIRE user should also enter 1950 for the Port to match the Port Number in NetExchange described below.
|
