Splits F9 Selection

Previous  Top  Next

   
From the Run Screen, click on the Splits button or press F9 to display the screen shown below.

·	If you are using a Timing Console with pads or buttons to time your meet, then splits will automatically be stored in your MM Database.

·	If you are using some other device to time your meet, or you are not connected to the timing console, or you wish to edit previously stored splits, you can edit splits directly into the sample splits window below.

·	To print a report of the splits of a given heat, click the Printer icon at the upper left.

·	It is important to enter "cumulative" splits, not "subtractive" splits. For example, for a 200 Free, enter 31.99, 1:09.73, 1:48.46, 2:25.01.

MM will display the Splits table with multiple entries for each lane depending on how many splits there are for that event and depending on whether you have pads at both ends checked for the event. In the above example, there were pads at both ends. Position your cursor on the lane and split column and key-in the split. When you are finished keying in the splits for that heat, click OK and MM will save those splits in your database. You can always "review" the splits for a heat simply by clicking on the Splits button at any time.

Note
When printing results, both Cumulative & Subtractive splits may be included in the Results Report.