| · | Start Lists for Flash Timing can be updated from the Run Menu or the Seeding Menu using Ctrl-U.
|
| · | In Cross Country scoring, any teams setup to not score by virtue of a setting in the Teams Menu will be ranked, but not scored for team rankings.
|
| · | When importing photo finish relay results into an empty heat, the actual relay letter for the relay will be imported if possible so that B teams stay as B teams rather than being assigned the A letter designation if imported before the real A team.
|
| · | To accommodate the new IAAF rule for randomizing lanes for the 2nd, 3rd, and 4th lanes, a fifth randomization rule has been added to Setup / Seeding Preferences / Randomization Rules. The new rule is to randomization the first half of the lanes and then to randomize in pairs after that.
|
| · | When scoring CC races from the Run Menu (not the CC/RR module), team scores for mixed multi-age group events did not separate into genders properly and this is corrected.
|
| · | When reading DAG Chip files in the CC/RR module, the folder specified for where the files should be read from was not working and this is corrected.
|
| · | In the CC/RR module, the option from Report Preferences to suppress Unattached team names now works.
|
| · | When reading FinishLynx files timed to the thousandths in the CC/RR module, the sort order of the times would be incorrect. This is now fixed. Reading FinishLynx files timed to the hundredths in the CC/RR module was ok.
|
| · | When reading FinishLynx files or DAG Chip files in the CC/RR module, you can now specify what folder the files should be read from.
|
| · | When opening serial ports for a timer or scoreboard, ports 9 through 16 can now be used in addition to 1 through 8.
|
| · | When opening a new database and trying to add the first event, an error occurred and this is corrected. This problem started with 2.0C.
|
| · | The Demo version of MEET MANAGER has been revised to allow unlimited adding and editing of athletes and entries, but results are still limited to events numbered 1 through 4 and only if there are fewer than 25 athletes in and individual event and fewer than 8 entries in a relay event. This revision allows those receiving multiple databases from say Association meets which advance to Regional meets to fix-up the entries for the regional meets in case there are changes after the Association meets are completed.
|
| · | For Youth Athletics, the date range for the low age of Divisions using birth date ranges can now be edited whereas the low date was set before according to a formula.
|
| · | For Youth Athletics, the division name for Registration labels now lists Young Men and Young Women instead of Young Boys and Young Girls. In addition, the athlete age is also listed along with the Division name.
|
| · | The Meet Summary Report now includes a DQ list choice which only lists results that were disqualified.
|
| · | When using the Web Menu to upload all results for all completed rounds, the choice to show By Heat and Compiled now works if that choice is chosen in the web preferences.
|
| · | When importing advancers from one meet to another for USATF, the Association code for the team also now transfers.
|
| · | For Masters meets the hurdle event names now include the distance rather than just Short Hurdles or Long Hurdles.
|
| · | For Long Jump and Triple Jump results that are FOUL or PASS, the wind reading is now blank instead of NWI.
|
| · | For results in field events with a DQ, the conversion to Metric or English is now suppressed.
|
| · | When updating records, a tie for first place broken by JD placement was not used to determine the new record holder and that is corrected.
|
| · | When exporting results to TEAM MANAGER, relay names for relay events that had prelims and finals did not transfer correctly for one of the rounds and this is fixed.
|
| · | When creating results reports and wanting to include competitor numbers, the competitor numbers are now included.
|
| · | If an event is changed from two rounds to one round, the prelim session is automatically deleted from the sessions list.
|
| · | In the CC/RR module, you can now import FinishLynx text .lif files that have times only.
|
| · | When creating results and wanting the competitor number to show with each athlete, the competitor number does now show for one and two column results.
|
| · | When entering marks in the Run Menu with the numeric keypad, you can use the * to enter DNS. This is so you do not have to move you hand from the keypad to enter no shows.
|
| · | There is a new option for the Real Time results in the Web Preferences to show not just compiled results, but to also include the by heat/flight results too.
|
| · | The Export of Generic Data in MS Access has added fields for entries and results that contain the actual time or mark in its display form rather than in just total seconds or total meters or inches.
|
| · | The computation of Combined Events points for the 100 meter hurdles when use the Alberta Youth Tables has been corrected. It was displaying twice the points that it should have.
|
| · | Under Setup / Options / Global there are 3 new options which give you the ability to 1) change all athletes from one team to another team, 2) change all teams to the same Region, and 3) change all teams to the same Association (youth athletics only).
|
| · | When printing a report of what is contained in a .tcl entry file, the seed time for the entry was sometimes left out and this is corrected.
|
| · | The Medal Count report has been corrected to count relays with places 4th thru 10th if greater than 3rd is being computed. In addition, if you want to use this report as an award medal count, you can enter from 1 to 4 for the number of medals to be counted for each relay.
|
| · | When creating results for Real Time Results, if you uncheck the web preference to include a print button on the html results, the button is now left off, whereas before the print button always appeared.
|
| · | When in multi-user mode and using the Database Refresh button in the Run Menu, the team scores on screen are now refreshed. In addition, when the refresh was used, it changed the status of Combined Event sub-events incorrectly and that is now fixed.
|
| · | When using the Consolidate Meet feature in the Seeding Menu, the wind readings are now copied from Prelims to Finals, whereas the readings were not being copied before.
|
| · | In the Seeding Menu, if prelims are completed and finals are not seeded, the entry count in the column for number of entries for this unseeded round will show the number of maximum advancers based on the event setup.
|
| · | Super Weight has been added to the choices for field events in the Events Menu. TEAM MANAGER also has this event added so that entries and results for the Super Weight can be exchanged between MM and TM.
|
| · | When reading bar codes for multiple chutes, you are now notified if the same runner is being entered in more than one chute.
|
| · | In the Reports / Results Menu, the Session List has been revised when "All Events" is selected to show the Combined Event Sub-Events in addition to the Combined Event header.
|
| · | When using a Button Timer for track races, there is a new option added to import the times from the timer as hand times. This is the recommended mode since times from button timers are not FAT times.
|
| · | Eight new events have been added to the Alberta Youth Tables for Combined Events.
|
| · | Flash Timing, a video timing system, has been added to the list of Photo-Finish vendors.
|
| · | Performance Lists with the option to show Alternates Only, Exhibition Only, or Foreigners Only now works correctly.
|
| · | When Listing or Scoring results from the Run Menu, there is a new option in Results Preferences to show the results by heat and follow that listing with the compiled results.
|
| · | When importing FieldLynx files for events that have only one flight, the JD placings to break ties are also imported.
|
| · | When uploading Real Time Results for all completed events from the Web Menu, the team scores are now also uploaded with each event if the team scores preference is selected from the Web Preferences Menu.
|
| · | The Check for Updates routine has been changed to a passive FTP system to avoid some firewall issues. This feature will take effect after your version is updated to 2.0Bf.
|
| · | Team Registration Labels now have the option to suppress labels for teams that have no entries.
|
| · | The event number is now included with the event name when creating results. The only time the event number is not included is when the results order is selected as Publication order.
|
| · | The generic export in MS Access has a new field added to the Entries Table which indicates the round letter.
|
| · | Check for Updates and the Install Update routines have been revised to correct a problem on MS Vista machines which prevented the update from completing.
|
| · | If Suppress "X" for Exhibition is checked in the Report Preferences, the "X" is suppressed not in just Results, but now is also suppressed in Performance Lists.
|
| · | The Interface for the non-lanes mode when using the Sprint 8 has been improved for getting times for non-lane races.
|
| · | When selecting prior round results in the Results reports, the prior round results were not being listed and this is corrected.
|
| · | In Real Time Results, if the Working Directory is incorrect, you now get an error message so indicating.
|
| · | Real Time Results upload methods have been improved to allow for Passive FTP which should eliminate most firewall issues and greatly speed up the upload of result files. Several other improvements are included such as automatically updating the team scores through the current event when using F12 to upload an event result with team scores.
|
| · | The IOC country codes within MM have been updated to include 29 new countries and 8 code changes.
|
| · | The entry mark for prelim results for Flat HTML and results to the web was incorrect and this has been fixed.
|
| · | Selecting one team for Performance Lists produced no data and this is corrected.
|
| · | The Track Button Interface for the Ultrak L10 button timer is now functional for track meets and CC/RR races.
|
| · | When selecting to show only male team scores with results, the male team scores were listed twice and this is corrected.
|
| · | The Track Button Interface for the Omega Power Time button timer is now functional for track meets.
|
| · | There is a new option to include the Session Title on the left side of the real time web results page when sorting the events by Session.
|
| · | When posting real time results to the web, there is a new option to show total team scores rather than just the team scores through the current event.
|
| · | If the meet is setup for Youth Athletics, the Competitor Labels and Registration Labels now have the Youth Division name, such as Bantam Boys, listed on the label.
|
| · | There is a correction to the female 55 Hurdles Age Grading Tables.
|
| · | This is the official release of the new 2.0 version of MEET MANAGER.
|
| · | The Track Button Interface for the Time Tech Sprint 8 and the Time Machine II is completed.
|
| · | The Track Button Interface for the ULTrak L10 and the Omega Power Time is still in development and thus is not available in this release.
|